Publicité
Les langues disponibles
Les langues disponibles
QRCode
MANUAL
SAFETYPOINT TAG PAIRING (see manual)
1. INSTALL and complete the download of the SmartApp. App icon will
appear automatically. Remember to accept popups.
2. LOGIN is not required. Simply select the TAG icon at the bottom of the
LOGIN page.
3. Press START on the handheld to see it as a device to connect and follow
the App instructions.
4. Select 'PAIRING SafetyPoint' and place TAG#1 under your smartphone
(tablet) or scan the QRcode on the label.
5. Repeat for TAG#2 (if a TAG needs to be replaced, both will need to be
RE-PAIRED).
Reader area
Associated
functions
Producer
The option multiplies the handheld keyboard by a maximum of 4 'pages'.
OPERATION
1. Power up the receiver paired with the handheld (see PAIRING p. 77 if the
system doesn't work) and wait a few seconds.
2. PAGE SELECTION: Simultaneously press START and key 1 on the handheld
to enable the functions on the first page; START + 2 for the second and
so on... up to 4 pages. We remind you that in the standard software the
EO is activated by pressing START, which automatically deactivates when
TimeOut expires or by pressing STOP.
3. COMMAND SELECTION: press the key on the handheld that activates the
function to be controlled. Example on page 1: press 1 = OUT 1 + MO is
activated (if the software is standard, the MO is activated in combination
with all the function keys).
4. Press STOP when done. To restore operation, press START + 1 or START + 2
again (up to 4 page changes) before choosing the command to activate.
Fixing holes
QR CODE
(UID)
UnIque identifier (UID)
PAGE CHANGE
By pressing the START button only, the system will not
manage any outputs. It is therefore always necessary to
select the page where you want to operate.
87
Publicité
