Publicité
Les langues disponibles
Les langues disponibles
It is very important that this instruction manual is kept with the appliance for
future reference. These warnings are provided for safety reasons as well as
for good conservation of the product. They must be read carefully before use.
Sistematica S.r.l. declines any responsibility deriving from failure to observe
the warnings in this manual.
• Never try to repair the equipment yourself. Repairs carried out by
inexperienced people can cause serious damage or malfunctions. Contact
the nearest authorized service centre.
• For correct operation, use only original spare parts.
• Connect the system only to a power source that complies with the
specifications described in this manual.
• Before carrying out mechanical/electrical interventions on the vehicle,
disconnect the power source.
• Do not travel with the system turned on (unless necessary for the operation
of the application).
• Observe all safety warnings and regulations when using the device in
restricted areas.
• Turn off the device in potentially explosive environments.
• Always respect the rules, instructions and indications in potentially
76
explosive environments.
Sistematica S.r.l. reserves the right to make, at any time and without notice,
modifications and improvements to the products to increase quality, and
without such modifications being reported in this publication.
WARNINGS
COPYRIGHT
No part of this manual may be reproduced or archived in a mass storage
system or transmitted to third parties in any form or by any means, without
Sistematica S.r.l. having issued a prior written authorization.
ABBREVIATIONS AND SYMBOLS
MO = 'MASTER OUTPUT'
Additional function combined with all outputs (to control, for example,
the general solenoid valve or the hydraulic pump simultaneously with the
activity deriving from the chosen key).
EO = 'EMERGENCY' OUTPUT
Command that is activated when the system is turned on using START and
deactivated by pressing STOP or after 2 minutes from the last activity on the
handheld (TimeOut).
M = MAINTAINED function
The output on the receiver remains active as long as the key is held down.
L = LATCHED (ON/OFF) function, i.e. connected.
When the key is released, the corresponding output on the receiver remains
activated. It deactivates the next time the button is pressed.
= NOTES, WARNINGS, REPORTS
Publicité
