0.4 - NOTES REGARDING NATURAL GASES
• This climate control appliance contains natural gas.
For specific information regarding the type and quantity of gas,
refer to the data plate affixed to the unit.
• The installation, assistance, maintenance and repair of the appli-
ance, must be performed by a qualified certified technician.
• Product removal and re-cycling operations must be performed by
a qualified certified technician.
• If the system has a leak-detection device installed, the checks for
leaks must be performed at least every 12 months.
• When the unit is checked for leaks, keeping a record of all inspec-
tions is highly recommended.
• Before starting to operate on the appliance, it is necessary to
check the zone surrounding the equipment to make sure there
are no dangers of fire nor risks of combustion.
To repair the refrigerating system, it is necessary to take the fol-
lowing precautions before starting the intervention on the system.
THIS PRODUCT MUST BE USED EXCLUSIVELY ACCORDING
TO THE SPECIFICATIONS INDICATED IN THIS MANUAL. USE
DIFFERENT TO THAT SPECIFIED, COULD CAUSE SERIOUS
INJURIES.
THE MANUFACTURER IS NOT LIABLE FOR INJURY/DAMAGE
TO PERSONS/OBJECTS DERIVING FROM FAILURE TO COMPLY
WITH THE REGULATIONS CONTAINED IN THIS MANUAL.
1. It is necessary to define the area around the work space and to
avoid working in tight spaces. Ensure safe work conditions by
checking flammable material.
2. All personnel in charge of maintenance and people which work
in the surrounding area must be instructed on the type work they
are going to carry out.
3. The zone MUST be checked with a specific refrigerating liquids
detector before and during work, so that the technician is aware
of potentially flammable atmospheres. Make sure the detection
device of the leaks is suitable for use with flammable refrigerants,
then that it does not produce sparks and that is adequately sealed
or intrinsically safe.
EN - 8