Télécharger Imprimer la page

SilverCrest STVL 50 B1 Mode D'emploi page 24

Masquer les pouces Voir aussi pour STVL 50 B1:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
Setting the timer
Press
/
to set an operation time
[
]
[
]
o
from 1 to 12 hours. Once you have chosen
a number, H blinks in the display next to the
number. After approx. 5 seconds without
further input, the product settles on the
chosen number and H stops blinking.
You can set the timer while operating in any
 
mode (see "Choosing a mode" and any
speed (see "Choosing the speed"). You can
also change the mode and speed while the
timer is in operation.
Turning the swing mode on/off
Turning on the swing mode:
o
Press
/
.
[
]
[
]
Turning off the swing mode:
o
Press
/
.
[
]
[
]
˜ Changing the remote control
battery
Fig. H
1. Opening the battery compartment
Hold the remote control with the back
facing upwards.
Push and hold the security latch
Pull out the battery compartment.
2. Remove the old battery and insert a new
battery into the battery compartment
Place the battery in such a way that the
positive terminal is facing up.
3. Push the battery compartment
into the remote control
compartment looks in place.
˜ Cleaning and care
Before cleaning, switch off and disconnect
 
the product from the mains supply.
m
WARNING! Risk of electric shock!
Do not immerse the electrical parts of the
product in water or other liquids. Never hold
the product under running water.
Clean the product with a slightly moistened
o
cloth.
Do not let any water or other liquids enter
 
the product's interior.
:
[
]
.
[
]
.
[
]
back
[
]
until the battery
7 ]
[
Do not use abrasives, harsh cleaning
 
solutions or hard brushes for cleaning.
˜ Storage
When not in use, store the product in its
o
original packaging.
Store the product in a dry, secure location
o
away from children.
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a)
and numbers (b) with following
meaning: 1–7: plastics/20–22: paper
and fibreboard/80–98: composite
materials.
Product:
The product and packaging materials are
recyclable and are subject to extended producer
responsibility.
Dispose them separately, following the illustrated
Info-tri (sorting information), for better waste
treatment.
The Triman logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
GB/IE
23

Publicité

loading