1.
Shoulder the vacuum cleaner body and fas-
ten lower and upper belts. Adjust the tightness as
necessary.
Fig.31
2.
Press
button to start vacuuming. If you want
to change the suction power, press
desired suction power is selected. Press
stop.
Fig.32
During the operation, hook the switch box on the lower
belt or the D-ring.
Fig.33
3.
the lid and take out the filter bag. Pull the strip on the
side of the opening to shut the filter bag and dispose of
the filter bag in whole.
Fig.34
► 1. Strip
button until the
When using a dust bag, take out the dust bag and dis-
button to
pose of the dust by releasing the latch.
Fig.35
► 1. Latch
NOTICE:
full. Continuous use with the filter bag full results in
reduced suction power.
NOTICE:
bag is designed for single use. Using filter bag repeat-
edly may cause clogging of the filter and results in
damage to the cleaner. If you want to use the bag
repeatedly, use a dust bag.
15 ENGLISH
Replace the filter bag when it becomes full. Open
1
1
Periodically check the filter bag if it is
Do not use an used filter bag. The filter