Accessories
Below is an overview of the accessories available for purchase for the Thermador gas cooktops and information on
how to use them correctly. These accessories are specially developed for your appliance.
Use this specially developed griddle for foods such as pancakes,
Griddle
▯
French toast, grilled sandwiches, bacon, vegetables and hamburg-
SGRIDDLEW
ers.
The Thermador griddle is customized to fit on the center burner for
▯
all Thermador gas cooktops.
For stir frying meat, vegetables and rice with a round-bottom wok.
Wok Ring
▯
SWOKRINGW
Use only with round-bottom woks with a maximum diameter of 16
▯
inches.
The Thermador wok ring is recommended to be used on the center
▯
burner for all Thermador gas cooktops.
Sealed STAR™ Burners
Your new cooktop has sealed STAR™ gas burners.
There are no burner parts under stainless steel to clean,
disassemble or adjust. Your cooktop has three different
burner sizes: small, medium, and large. Match the
corresponding letters on the burner cap and burner
base. See Burner Cap Placement.
STAR™ Burner Caps
The burner cap is porcelain coated steel. The burner
caps must be properly placed for the cooktop to function
properly. If the burner cap is not properly placed, one or
more of the following problems may occur:
Burner flames are too high.
▯
Flames shoot out of burners.
▯
Stainless steel discolors.
▯
Burners do not ignite.
▯
Burner flames light unevenly.
▯
Burner emits gas odor.
▯
WARNING
9
To prevent flare-ups and avoid creation of harmful
by-products, do not use the cooktop without all
burner caps, all burner bases and all burner grates
properly positioned.
WARNING
9
To prevent burns, do not touch burner caps, burner
bases or grates while hot. Turn the cooktop off and
allow the burners to cool.
Burner Cap Placement
Each cap has a letter (B, D, or F) cast in the underside of
the cap that corresponds to a letter (B, D, or F) cast in
the burner base that is attached to the appliance.
Place each burner cap on its correct burner base per
▯
its corresponding letter designation.
Place burner cap gently on top of burner base so that
▯
the prongs of the burner base fit snugly into the
groove of the burner cap.
1
2
11