Télécharger Imprimer la page

BorMann PRO BBC8520 Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
EN
Charging
This product is partially charged from the manufacturer. Fully charge the unit immediately after purchase. In order to prolong the product life, be sure to fully
recharge the unit after each jumpstarting, or every 3 months even if this unit has not been used. If battery voltage in the Device is too low, this item will shut
off to prevent damage to itself. Recharge the unit as soon as possible to be activated and fully charge it to ensure long battery life. In addition, we recommend
not to charge and discharge the unit at the same time.
AC Charging:
1) Insert AC charging adapter into charging jack of the unit.
2) Plug the other end of AC charging adapter into a wall socket.
3) Fully charge the unit.
4) When charging is complete, unplug the AC charging adapter from the wall socket first, then from the charging jack on the Device.
DC Charging in Your Vehicle:
1) Turn the vehicle engine on.
2) Insert the DC charging adapter into the charging jack of the unit.
3) Plug the other end of DC charging adapter into vehicle's cigarette lighter socket.
4) Fully charge the unit. Engine must keep running during entire charge.
5) When charging is completed, unplug the DC charging adapter from the vehicle first, then from the charging jack on the Device.
Charging Time:
LCD will show "100%" as fully charged. Charging time will differ based on the discharge level and the power source used. If charging begins from 5% to full
charge, it approximately takes 5 hours for AC charging.
USB Power
Connect the USB device to the device with either the original cable or the included multi-tip cable (better use original cable of Apple® for Apple® products).
Press Power button to start USB power, and press Power button to quit. When disconnected, the device will automatically shut off. The number of times you
can recharge a USB device will vary between devices.
Flashlight
Press Power button for 3 seconds to start flashlight. Press once to switch lighting modes: Steady On – Strobe – SOS – Off.
4
WWW.NIKOLAOUTOOLS.GR

Publicité

loading

Ce manuel est également adapté pour:

037309