Publicité
Les langues disponibles
Les langues disponibles
CONTROL PANEL
(Figure 2)
A
Slider
B
Booster button
C
Operation and timer indicator
D
Timer controls
E
Automatic synchronisation button
F
Operation indicator
Item
Slider
Booster button
Operation and timer indicator
Timer controls + and -
Automatic synchronisation button
Operation indicator
Bridge zone button
Child lock button
On/off button
Booster button
Button for extraction system
WORKING PRINCIPLE OF THE EXTRACTION SYSTEM
The extraction part of the appliance is used for handling the air of cooking fumes.
The appliance can be installed in two different ways.
Extracting
The cooking fumes are extracted outside.
Warning:
Never connect the pipe to a duct that contains gas or other fuels.
Recirculating
The cooking fumes go through carbon filters or a plasma filter. The filter purifies the fumes and recirculates these
back to the kitchen.
A good outflow of the air is necessary.
Extra information
•
Note:
New houses in the Netherlands may no longer vent outside.
•
For recirculation, it is necessary to use carbon filters or a plasma filter. For more information on the differences
between carbon and plasma filters go to the website www.inventum.eu.
•
Attention:
Carbon filters should be replaced every six months.
G
Bridge zone button
H
Child lock button
I
On/off button
J
Booster button
K
Button for extraction system
Function
To increase or decrease the power level.
To activate the booster mode.
To show the set power level or the set time.
To set the cooking timer.
To activate the automatc synchronisation of the
extraction system.
To show the speed of the extraction system.
To connect the two cooking zones to one large cooking
zone.
To lock or unlock the control panel.
To start or stop the appliance.
To activate the booster mode of the extraction system.
To activate and setting the speed of the extraction.
English
•
31
Publicité
