Familiarising Yourself With Your Appliance; Accessories; Basic Operation - Gaggenau AC2001.1 Manuel D'utilisation Et Notice D'installation

5 Familiarising yourself with your appliance
5.1 Controls
The controls are used to configure all functions of your
appliance and to obtain information about the operat-
ing status.
6 Accessories
You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. → Page 25
You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
7 Basic operation
7.1 Switching on the appliance
Press ⁠ .
▶
a The appliance starts at fan setting 1.
7.2 Setting a fan level
Press , or
▶
7.3 Switching off the appliance
Press ⁠ .
▶
Note: If the fan is running at level 2 or 3, press
twice.
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press ⁠ .
▶
a After approx. six minutes, the appliance automatic-
ally switches to a lower fan setting.
Note: You can switch on the intensive mode directly in
off-mode. Once the six minutes has elapsed, the appli-
ance is switched off again.
⁠ .
Familiarising yourself with your appliance en
www.gaggenau.com

Accessories

Clean Air standard odour
filter (replacement)
Clean Air Standard recir-
culation kit
Remote control
7.5 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
1. Switch on fan setting 1, 2 or 3.
Press and hold ⁠ .
2.
a The fan run-on is activated; the button for the set fan
setting flashes.
a The appliance automatically switches off after ap-
prox. 30 minutes.
7.6 Switching on intermittent ventilation
With intermittent ventilation, the appliance switches the
ventilation on and off at regular intervals.
Press and hold ⁠ .
▶
a The interval ventilation is activated,
a The interval ventilation switches off after 24 hours.
7.7 Switching off interval ventilation
Press and hold
▶
7.8 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press ⁠ .
▶
Switching off the appli-
ance
Switching on fan setting 1
Resetting the saturation
indicator
Switching on fan setting 2
Switching on fan setting 3
Switching the intermittent
ventilation on or off
Switching intensive mode
on or off
Switch the lighting on or
off.
Saturation indicator
Order number
AA210110
AA211812
AA200510
flashes.
or press ⁠ .
21