Declaration Of Conformity - Honeywell TA3840 Manuel D'installation

DECLARATION OF CONFORMITY

We declare that the following device:
SAFETY UNIT RACK TYPE TA3840S
meet the basic requirement of the European Community Directives :
Directive ATEX 94/9/EC
The intrinsically safe product complies with the standards:
EN 60079-0 (2012)
EN 60079-11 (2012)
and the EC Type Examination Certificate LCIE 04 ATEX 6135 X was issued to manufacturer:
Honeywell Marine
9, rue Isaac Newton
ZA Port Sec Nord
18000 Bourges FRANCE
The notified authority in charge of the production quality survey is:
L.C.I.E.
33, avenue du Général Leclerc
92266 FONTENAY AUX ROSES (France)
We hereby certify that the apparatus described above, complies with the essential Health and
Safety Requirements relating to the design and construction of equipment and protective systems
intended for use in potentially explosive atmospheres given in Annex II of Council Directive
94/9/EC of 23 March 1994.
The Technical Construction File required by these Directives is maintained at Enraf B.V., Delft
J. Bok
Approvals Engineer
May 2014
Doc No: MI5008E – Revision 7 – FRE
II (1) G [Ex ia Ga] IIB or IIC
Directive EMC 2004/108/EC
Systèmes Racks
TA3840 Manuel d'Installation
28