Parts Overview - Bresser NightSpy 1.7x24 Mode D'emploi

RISK of property damage!
Do not disassemble the device. In the event of a defect, please contact
the Service Centre in your country (see the warranty card).
Use only the recommended batteries. Always replace weak or
empty batteries with a new, complete set of batteries at full capacity.
Do not use batteries from different brands or with different capacities.
The batteries should be removed from the unit if it has not been used
for a long time.
Privacy PROTECTION!
The devices are intended only for private use. Please heed the privacy
of other people. Do not use them to look into apartments, for example.

PARTS OVERVIEW

1. On / Off button
2. IR button On / Off
3. Lens / lenses
14
4. Eyepiece(s)
5. Protective cover(s)
6. Battery compartment
7. Infrared illuminator
8. Status LED
9. Status LED
INCLUDED WITH YOUR PURCHASE
Night vision device, nylon carrying case, instruction manual
OVERVIEW
The night vision NightSpy is a light amplifier for use in dusk. By using the
built-in infrared illuminator (2) obser vations are even possible in complete
darkness. The outer surface of the device is coated in rubber. The device
can be run regardless of mains power and can be operated with a battery.
Your NightSpy is ideal for a variety of professional and recreational uses.