List Of Parts - Bresser National Geographic 861026 Mode D'emploi

List of Parts

B
Centre axle
C
a Twist-up eyecups
or
C
b Rubber eyecups
D
Dioptre adjustment
E
Body of the binoculars
F
Lens tube
G
Central focussing wheel
H
Eyepiece
I
Objective lens
J
Threaded tripod connection
1)
Image circle with correctly set eye distance
10
Eyepieces for spectacle wearers
Depending on the model, your binoculars are
equipped with either twist-up eyecups (2a) or rub-
ber eyecups (2b). Since there is a larger distance
between the binocular eyepiece and the pupil for
those wearing glasses, both eyecup varieties can
be adjusted individually.
Twist-up Eyecups (2a)
Screw in the twist-up eyecups (2a) to use the
binoculars while wearing glasses. If you are not
wearing glasses, unscrew the eyecups to achieve
the required distance from your pupils.
OR
Rubber Eyecups (2b)
To use the binoculars while wearing glasses, turn
the rubber eyecups (2b) toward the sides and
down. If you are not wearing glasses, leave the
eyecups in the upright position to achieve the re-
quired distance from your pupils.