Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Programming the Cooking Stop Time
1 Press on the clock sensor
until the symbol
2 Select the cooking stop time by pressing
the
or
sensors.
3 Two consecutive beeps will then sound and
the display will show the remaining cooking
time. The
(15
symbol will flash slowly to
indicate that the oven will switch itself
automatically.
4 Select a cooking function and temperature.
5 Once it is the set time, the oven will turn
off, an alarm will sound and the
will flash more quickly.
6 Press on any sensor on the control panel to
stop the alarm.
You can change the programmed cooking stop
time at any moment by pressing on the clock
sensor
(2)
until the (15symbol flashes and
then by pressing on the
two beeps you hear after that will confirm the
new time has been set.
You can use this function even if you are
already cooking with the oven. If this is the
case, follow all of the above instructions
except No. 4.
Programming Cooking Time and Cooking
Stop Time
11 Press on the clock sensor (2). The symbol
(14)
will flash.
12 Select the cooking time by pressing the
+
+or
+
+sensors.
13 Two consecutive beeps will then sound,
and the display will show the remaining
cooking time. The (14symbol will flash
slowly.
14 Press on the clock sensor
until the
symbol15)
44
(2)
several times
15)
flashes.
15)
+
or
–
sensors. The
(2)
several times
flashes.
15 Select the cooking stop time by pressing
the
16 This will be confirmed by two beeps. The
current time will show on the display and
the15)
17 Select a cooking function and temperature.
18 The oven will remain off, with
symbol lit and the
slowly. The clock will show the current time
and the inside light will remain off. The
oven is now programmed.
19 When it is time to start cooking, the oven
will switch on and will operate for the
symbol
programmed cooking time. The clock
display will show the remaining cooking
time.
10 Once the set time is reached, the oven will
turn off, an alarm will sound and
and (15symbols will flash.
11 Press on any sensor on the control panel
to stop the alarm.
If you wish to change the cooking stop time
while cooking is in progress, press on the
clock sensor
symbol flashes. You can then change the
cooking stop time by pressing on the
sensors. The two beeps you hear after that
will confirm the new time has been set.
Child Safety Function
This function locks the oven, preventing small
children from playing with it. To turn on the
function, press on the
hear a long beep and see several flashing
dots between the digits of the temperature
display (4). The oven is now locked.
or
sensors.
symbol will remain lit.
(14)
several times until the
(16)
symbol until you
the(15)
symbol flashing
the14)
or
Publicité
Table des Matières
