Introduction - Ugin DUCATRON QUATTRO Mode D'emploi

UGIN DENTAIRE

INTRODUCTION

This new generation induction centrifuge has been designed better to respond to your needs.
The direct movement transmission ensures constant start power along with a very low sound level during
injection.
The productivity reached by its new induction generator is higher than that previously generated on the
Series 3 DUCATRON.
Particular attention has been given to safety, accessibility and design.
Several sensors check that the machine is operating correctly, as follows:
- A warning light on the control panel indicates any lack of water in the cooling circuit, to protect the
self-induction system.
- Then the light is on the heating system becomes inoperable.
- A warning light on the front face of the machine indicates any generator malfunction.
Two other LEDs are part of the control system:
- One confirms the arm position (thus authorizing coil movement)
- and the other confirms the cap as being in position, thus allowing injection to take place in
complete safety.
Another feature is that the DUCATRON Quattro compact dimensions ensure easy installation in all types of
dental prosthesis laboratories.
The instrument design gives easy access to the various control elements.
Only the parts at the front of the machine are able to be removed, thus rendering any intervention simple
and rapid.
Rev. 080119
DUCATRON QUATTRO
14