Wieland SNH Serie Mode D'emploi page 27

Actuating elements for emergency stop M12
Function according to EN 418 /
EN ISO 13850
Emergency stop heads
Housing material
Unlocking
Protection rating
Rated impulse withstand voltage U
Ambient operating temperature
Storage temperature
Torque
Installation diameter
Short-circuit protective device
Contact blocks
Contact type
Contact material
Mechanical life
Electrical life cycle
Utility category
Thermal continuous current Ith
Continuity resistor
Bounce time
Connection system
Number of poles
Approvals
Rated short-circuit current
Additional Data
Pollution degree
Safety-relevant characteristics
B
10D
Ui = Rated insulation voltage; Ue = Rated operating voltage; Ie = Rated operation current
Doc. # BA000612 – 05/2023 (Rev. E)
SNH 1102 M12
Emergency stop
Plastic (PA)
Rotary release left/right
IP65/IP67 (from the front side) IP65/IP67 (from
the rear side, with a connected M12 connector)
2.5 kV (contact block)
imp
-25°C ... + 70°C
-40°C ... + 80°C
1.0 Nm ... 1.7 Nm
22.3 mm
Fuse cutout 2A gG
2 positive opening contacts
AgNi
50,000 switching cycles
50,000 switching cycles
AC15 50 V (Ui), 35 V (Ue) 2 A (Ie)
DC13 50 V (Ui), 35 V (Ue) 2 A (Ie)
2 A
< 50 mΩ
< 10 ms
M12 connector (A-coded)
5
CE, TÜV, c(UR)us, UKCA
1000 A
2
226,000
SNH EN 27 / 99