Publicité
Les langues disponibles
Les langues disponibles
Important information concerning installation!
▪
To ensure proper electrical connection, follow the recommendations given in the present manual.
▪
Unpack the appliance and visually check that it is not damaged. Do not connect a damaged appliance.
Inform your retailer or point of sale of any damage. In such a case, keep the packaging.
▪
It is recommended that the appliance be allowed to settle for at least 4 hours before connecting the
electrical power supply, so that the compressor fluid feed is correct.
▪
Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation, observe the
installation recommendations provided.
▪
In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with walls or
with any hot element (compressor, condenser). Observe the installation recommendations.
▪
The appliance should not be placed close to radiators or cooking hot plates or gas
▪
Check that electrical sockets remain accessible when the appliance is installed.
▪
This refrigerating appliance is not intended to be used as a built-in appliance
POWER SAVING
To limit the electricity consumption of your appliance:
Install it in an appropriate place (see "Installing your appliance").
▪
▪
Leave the doors open as little time as possible.
▪
Do not put food that is still hot into the appliance.
▪
To ensure that the appliance operates properly, clean the condenser regularly (see "Routine servicing
of your appliance").
▪
Regularly inspect the door seals and ensure that they are still closing properly. If this is not the case,
contact your after-sales service.
Recommendation combination:
The following combination of drawers, baskets, and shelves is recommended for energy to be used as efficiently as possible
by the refrigeration unit.
Trouble shooting and spare parts
▪
Any electrical work should be carried out by a qualified and skilled technician.
The appliance should be repaired by an accredited repair centre, using only manufacturer's original
Spare parts.
▪
Aesthetic and functional spare parts in accordance with REGULATION (EU) 2019/2019 (Annex II,
point 3.), are available for after sales service network and end users for a maximum period of 7 or 10
years (List on Annex II, point 3.a.1 et 3.a.2) from the date of end of commercialisation on the market
of the last unit. The list of spare parts and the procedure for ordering them (professional access / end
user access) are available on the following website:
following address: Interfroid Services, 143 Bd Pierre Lefaucheux - 72230 ARNAGE.
▪
For other functional spare parts not specified in EU regulation 2019/2019, they are available for a
period of 7 years.
▪
The manufacturer's warranty is 1 year for functional parts.
www.interfroidservices.fr
19
rings.
or by post at the
Publicité
