Sears CRAFTSMAN C950-52948-0 Mode D'emploi page 14

ASSEMBLY
SNOW CHUTEASSEMBLY
NOTE: Thechuteringassembly (A,Figure10)comesinstalled on theunit
fromthefactory.
1. Turncrankassembly (Figure4) untilthearrowon outerring (B, Figure
10)of chuteringassembly pointsforward.
NOTE: Makesuretheslot in thechutering alignswith thearrowonthe
outerring.
2. Installchutedeflector ( C) usingfourscrews (D)and nuts(E)in holes
asshown.Thechutedeflector m ustpointforwardfor properinstalla-
tion.
3. Tightenscrews snuglybutbecarefulnotto over-tighten.
Snow Chute Assembly Figure 18
14