MINN KOTA RIPTIDE TERROVA Instructions D'installation page 15

5
ITEM(S) NEEDED
i.
If installing directly to a Helix Adapter Cable
(Item #13), align the Receptacle on the Ethernet
Cable with the Eight Pin Connector on the Helix
Adapter Cable provided. Notice the keyed
connectors. Tighten the Collar from the Ethernet
Cable to secure the connection.
NOTICE: Minn Kota provides one Helix Adapter Cable
(AS EC QDE - Ethernet Adapter Cable -
with every trolling motor equipped with Advanced
GPS Navigation.
j. The Helix Adapter Cable directly connects the
Ethernet Cable to a Helix fish finder. Locate the
Helix Adapter Cable Keyed Connector on the back
of the fish finder. Plug the Helix Adapter Cable
into the back of the Helix fish finder to complete
the connection.
©2024 Johnson Outdoors Marine Electronics, Inc.
#13 x 1
5i
Ethernet Ethernet
Cable Cable
720074-1)
5j
ADVANCED GPS NAVIGATION
Receptacle Receptacle
Ethernet Ethernet
Cable Cable
Helix Adapter Cable Helix Adapter Cable
Eight Pin Eight Pin
Connector Connector
Helix Adapter Cable Helix Adapter Cable
Adapter Adapter
Cable Keyed Cable Keyed
Connector Connector
Plug into Plug into
Helix Fish Helix Fish
Finder Finder
minnkota.johnsonoutdoors.com | 15