Publicité
Les langues disponibles
Les langues disponibles
6 Electrical connection
6.3
Connecting the device
Aids
Material
Requirements:
•
The system has been de-energized and secured against being switched on again.
•
The connections for the voltage supply and signal processing have been correctly prepared.
Procedure:
1. Loosen the quick-release
screws (1).
2. Remove the housing front and
place it down, taking care to pro-
tect it from pollutants.
3. Loosen the acorn nut (2).
4. Guide the connecting cable (3)
through the cable fitting.
20
Slotted screwdriver
Torque wrench with open-ended insert, wrench size 20
Connecting cable, "Electrical data ", Page 9
Publicité
