JUMO hydroTRANS S30 Notice Succincte page 41

4 Technical data
4.1 Electrical safety
Requirements
4.2 Electrical data
Device with analog output
Voltage supply
Power consumption
Overvoltage category
Pollution degree
Protection rating
Electrical connection
Connection elements
Connecting cable
Conductor cross section
Without ferrule
With ferrule
Stripping length
Without ferrule
With ferrule
Temperature resistance
Device with RS485
Voltage supply
Power consumption
Overvoltage category
Pollution degree
Protection rating
Electrical connection
Connection elements
Connecting cable
Conductor cross section
Without ferrule
With ferrule
Stripping length
Without ferrule
With ferrule
Temperature resistance
DIN EN IEC 61010-1:2020
The device must be equipped with an electrical circuit that meets the require-
ments for "Limited-energy circuits".
DC 24 V, -33 %/+33 %, SELV, PELV
≤ 2.4 W
II
2
DIN EN 61140, class III (protective low voltage)
Spring-cage terminal
AWG 28 to AWG 14
2
0.2 to 1.5 mm
2
0.25 to 1.5 mm
8 mm
10 mm
≥ 80 °C
DC 24 V, -58 %/+33 %, SELV, PELV
≤ 2.4 W
II
2
DIN EN 61140, class III (protective low voltage)
Spring-cage terminal
AWG 28 to AWG 14
2
0.2 to 1.5 mm
2
0.25 to 1.5 mm
8 mm
10 mm
≥ 80 °C
4 Technical data
9