Publicité
Les langues disponibles
Les langues disponibles
5.2
Mount device without connecting flange
Aids
Material
Requirements:
•
The mounting hole is drilled into the duct wall.
Procedure:
1. Glue the rubber seal (2) to the
duct wall (1) centered in front of
the mounting hole.
2. Insert the probe into the mount-
ing hole.
3. Mount the device to the duct
wall using the socket button
self-tapping screws (3).
Electrical connection: Seite 18
Cross-headed screwdriver
Rubber seal, self-adhesive
2 socket button self-tapping screws 4.8 × 38
5 Mounting
15
Publicité
