Gardena EasyCut Li Manuel D'utilisation page 10

If the product got hot while operation, let it cool down before storage.
Do not overload the product.
Warning! When wearing hearing protection, and due to the noise produced by
the product, the operator may not notice persons approaching.
Always wear suitable clothing, protective gloves, and stout shoes.
Always ensure that you have a secure foothold whilst working.
Do not work on slippy underground.
2. OPERATION
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the blade to stop and slide the protective cover over
the blade before you transport the product.
To charge the battery [ Fig. O1 ]:
CAUTION!
Overvoltage damages the battery and the charging power
supply.
v Make sure that you use the correct mains voltage.
Before you use the battery the first time, the battery must be completely
charged.
The lithium-ion battery can be charged in any state of charge and the
charging process can be disconnected at any time without to damage
the battery (no memory effect).
1. Connect the charging power supply
The power LED (Lc) illuminates red.
2. Connect the battery charger cable
When the charging control lamp
flashes green, the battery is being charged.
When the charging control lamp
illuminates green, the battery is completely charged
(Charging time, see 6. TECHNICAL DATA).
3. Examine the charge status regularly while you charge.
4. When the battery is completely charged, disconnect the battery charger
(E)
cable from the charging socket
5. Disconnect the charging power supply
Work positions:
The hedge trimmer can be operated in 3 positions.
– Side trimming [ Fig. O2 ]
– High trimming [ Fig. O3 ]
– Low trimming [ Fig. O4 ]
To start the hedge trimmer [ Fig. O5 ]:
DANGER! Risk of injury!
Risk of injury if the product does not stop when you
release the start levers.
v Do not bypass the safety devices or switches. For example do
not attach the start levers to the handle.
To start:
The product is provided with a two-handed safety device (2 start
levers with starting lockout) to prevent the product from being
turned on by accident.
1. Remove the protective cover from the blade.
2. Hold the front handle (1) with one hand and push the front start
lever (2) .
3. Hold the main handle (3) with the other hand, push the starting
lockout (4) forward and pull the rear start lever
The hedge trimmer starts.
4. Release the starting lockout
To stop:
1. Release the two start levers
The hedge trimmer stops.
2. Wait for the blade to stop and slide the protective cover over
the blade.
10
GAR_09836-20.960.05_2024-05-14.indd 10 GAR_09836-20.960.05_2024-05-14.indd 10
(C)
into a mains socket.
(E) ;
to the charging socket .
; at the charging socket
; at the charging socket
;
.
(C) from the mains.
(5) .
(4) again.
(2) / (5) .
3. MAINTENANCE
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the blade to stop and slide the protective cover over
the blade before you maintain the product.
To clean the Hedge Trimmer [ Fig. M1 ]:
DANGER! Risk of injury!
Risk of injury and risk of damage to the product.
v Do not clean the product with water or with a water jet
(in particular high-pressure water jet).
v Do not clean with chemicals including petrol or solvents.
Some can destroy critical plastic parts.
The airflow slots must always be clean.
1. Clean the product with a damp cloth.
2. Clean the airflow slots (6) with a soft brush
(do not use a screwdriver).
3. Spray the blade with the GARDENA Cleaning Spray, Art. 2366.
Avoid contact of the oil with the plastic parts.
To clean the charging power supply:
Make sure that the contacts of the charging socket and the charging
power supply always are clean and dry before you connect the charging
power supply.
Do not use running water.
v Clean the contacts and the plastic parts with a soft and dry cloth.
4. STORAGE
To put into storage:
The product must be stored away from children.
1. Charge the battery.
2. Clean the hedge trimmer and the charging power supply
(see 3. MAINTENANCE).
3. Store the hedge trimmer and the charging power supply in a dry,
enclosed and frost-free place.
5. TROUBLESHOOTING
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the blade to stop and slide the protective cover over
the blade before you troubleshoot the product.
Problem Possible Cause
Hedge is not cleanly cut Blade is blunt or damaged.
Hedge trimmer does not Under voltage.
start. Charging control
;
lamp flashes green
Hedge trimmer does not Battery overload.
start. Charging control
;
lamp flashes red
Blade is blocked.
Battery temperature is out of
range.
Power LED (Lc) on the
Charging power supply is not
charging power supply
plugged in correctly.
does not illuminate
NOTE: For any other malfunctions please contact the GARDENA service depart-
ment. Repairs must only be done by GARDENA service departments or specialist
dealers approved by GARDENA.
Remedy
v Let the blade be replaced by
the GARDENA Service.
v Charge the battery.
v Release the start levers.
Start again.
v Remove the obstacle.
Start again.
v Use the battery in surround-
ings where temperatures are
between 0 °C and 40 °C.
v Plug the charging power
supply into a wall outlet.
14.05.24 09:56 14.05.24 09:56