Publicité
Les langues disponibles
Les langues disponibles
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) electric tool or
battery-operated (cordless) power tool .
Work area safety
Keep work area clean and well lit.
a)
Cluttered or dark areas invite accidents .
Do not operate power tools in
b)
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes .
Keep children and bystanders
c)
away while operating a power
tool. Distractions can cause you to lose
control .
Electrical safety
Power tool plugs must match the
a)
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of electric
shock .
Avoid body contact with earthed
b)
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded .
Do not expose power tools to rain
c)
or wet conditions. Water entering a
power tool will increase the risk of electric
shock .
Do not abuse the cord. Never use
d)
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock .
28 GB/IE
When operating a power tool
e)
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the
risk of electric shock .
If operating a power tool in a
f)
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock .
Personal safety
Stay alert, watch what you are
a)
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
or under the influence of drugs,
alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury .
Use personal protective
b)
equipment. Always wear eye
protection. Protective equipment such as
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries .
Prevent unintentional starting.
c)
Ensure the switch is in the off-
position before connecting to
power source and/or battery
pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents .
Remove any adjusting key or
d)
wrench before turning the power
tool on. A wrench or a key left attached
to a rotating part of the power tool may
result in personal injury .
Do not overreach. Keep proper
e)
footing and balance at all times.
This enables better control of the power tool
in unexpected situations .
Publicité
