Midea MWMW050CM1A Manuel Du Propriétaire page 29

Remote Screen Indicators
Information are displayed when the remote controller is power up.
AUTO
COOL
DRY
Note:
All indicators shown in the figure are for the purpose of clear presentation. But
during the actaul operation, only the relative function signs are shown on the
display window
.
Mode display
AUTO
FAN
HIGH
Displayed when data transmitted.
MED
Appears when the remote is enabled
and can send a signal to the unit. If
LOW
you would like to turn the remote off
without affecting the unit, point the
remote away from the unit and press
the ON/OFF button.
To turn the remote on, point the remote
away from the unit and press the ON/
OFF button. The unit will not receive
commands from the remote if this
indicator is not illuminated.
Displayed when TIMER ON time is set
Displayed when TIMER OFF time is set
Shows set temperature or room
temperature, or time under TIMER
setting
Indicated all the current settings are
locked
Displayed when ComfortSense feature
is activated(some units)
Displayed when SLEEP feature is
activated
Fan speed indication
HIGH
MED
LOW
NO display
COOL DRY
FAN
High speed
Medium speed
Low speed
Auto fan speed
Page 29
Page 25