Geberit HS50 Instructions De Montage page 26

EN
Display of operating state
The following displays and controls are provided on
the control unit:
Table 2: Displays and controls
Element Status
Off
Lights up
green
Flashes
green
Lights up
orange
Status LED
Lights up
red
Flashes
green/red
Press
button for
< 5 s
<Test>
button
Press
button for
> 5 s
26
Meaning
• No operating voltage
• Normal operation
• Solenoid valve open
• Warning, diagnose
with Geberit Control
app
• Addressing via
1)
GEBUS pending
• Malfunction, diagnose
with Geberit Control
app
• Basic settings not
configured
• Localisation of the
1)
hygiene flush unit
• Solenoid valve test:
Solenoid valves open
one after the other for
5 s after releasing the
button
• When the solenoid
valve test is active:
Cancel test
• In the event of an
active malfunction:
suppress buzzer
• Identification of the
2)
hygiene flush unit
• Pair with the Geberit
Control app
Element Status
Off
4)
On
3)
Buzzer
Beeps
every
second
1) Only when connected to GEBUS → see Geberit
Connect system manual
2) When the button is pressed, the hygiene flush unit is
highlighted in the Geberit Control app under
[My end devices].
3) The buzzer is deactivated ex works. It can be
reactivated in the Geberit Control app if required.
Serious faults such as backpressure are always
indicated by the buzzer.
4) The buzzer can be suppressed by pressing the
<Test> button.
Installing the cover plate
The following cover plates are available for the
Geberit hygiene flush units:
• art. no. 616.222.11.1: cover plate for Geberit
hygiene flush unit, white alpine
• art. no. 616.222.21.1: cover plate for Geberit
hygiene flush unit, bright chrome-plated
• art. no. 616.222.46.1: cover plate for Geberit
hygiene flush unit, matt chrome-plated
• art. no. 241.595.00.1: cover plate for Geberit
hygiene flush unit, brushed stainless steel
Meaning
• Normal operation
• Buzzer deactivated
• Malfunction, diagnose
with Geberit Control
app
• Localisation of the
1)
hygiene flush unit
2 / 2
27021608432037259 © 04-2024
971.548.00.0(02)