collected coarse debris may cause the filters to clog. Check the condition of the filters regularly and clean
them if necessary under running water.
Follow the steps below to clean the filters in the wash cabinet.
Hold the coarse filter and rotate it
anticlockwise to unlock the filter.
Lift the filter upwards and out of the
dishwasher.
Rinse the filters under running water.
For a more thorough clean, use a
soft cleaning brush.
WARNINGS!
• Do not over tighten the filters. Put the filters back in sequence securely, otherwise coarse debris could
get into the system and cause a blockage.
• Never use the dishwasher without filters in place. Improper replacement of the filters may reduce the
performance level of the appliance and damage dishes and utensils.
Cleaning the spray arms
It is necessary to clean the spray arms regularly, otherwise hard water chemicals will clog the spray arm
jets and bearings.
To clean the spray arms, follow the instructions below:
Pull the fine filter off the filter assembly.
Detach the coarse filter from the main filter
by gently squeezing the tabs at the top and
pulling it away.
Reassemble the filters, replace the
filter insert, and rotate clockwise to
the close arrow.