Publicité
Les langues disponibles
Les langues disponibles
1. The aesthetic panel could be processed according to the above illustrated dimensions.
2. Fix the furniture door to the dishwasher door using the supplied screws, bolts and brackets.
Velcro stripe
3. Remove four screws from the inside of the dishwasher door and then fix the furniture door to the
dishwasher door by inserting and tightening the four long screws.
Adjusting the Tension of the Door Spring
The dishwasher door is attached to springs.
They are set at the factory to ensure that
they are at the proper tension, so that the
door can be opened and closed smoothly.
After the furniture door has been fitted, you will need to
adjust the tension of the door spring.
Use an Allen key (not supplied) to rotate the adjusting
screw or either tighten or loosen the spring.
The spring tension is correct when:
a) The door remains horizontal in the fully opened
position.
b) You are able to close the door easily.
WARNING: If the tension of the door spring is not adjusted, then it could cause damage to the appliance.
Paste the Velcro stripes to the aesthetic panel and
dishwasher door.
Velcro stripe
Publicité
