Technical Information; Installation Considerations - Axor Citterio 39454 1 Série Instructions De Montage / Mode D'emploi / Garantie

Table des Matières

Publicité

T EC HN I C A L I N FO RMATIO N
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - 39461xx1, 39462xx1
handshower
spout
Flow rate - 39453xx1, 39454xx1
handshower
spout
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
I NSTALL ATI ON CO N SIDE R ATION S
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
Th is tr i m is for use w it h rou gh val ve
134 4 4181.
⁄ The mounting surface must be finished and made
watertight before installation of this trim kit.
⁄ Protection against backflow is provided by a check
valve in the handshower hose and by an automati-
cally resetting diverter.
⁄ 39453xx1, 39454xx1 only: This handshower is for
use with automatic compensating valves rated at 1.7
GPM (6.4 L/min.) or less.
2
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.75 GPM (6.6 L/min) max.
approx. 5.6 GPM @ 44 PSI
2.0 GPM (7.6 L/min)
approx. 5.6 GPM @ 44 PSI
E N G L I S H
⁄ 39461xx1, 39462xx1 only: This handshower is for
use with automatic compensating valves rated at 1.3
GPM (4.9 L/min)or less.
⁄ This unit is not anti-scald. In Massachusetts, or if re-
quired by local plumbing code, install an approved
remote pressure balance valve or other approved
anti-scald device.
⁄ Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.

Publicité

Table des Matières
loading

Table des Matières