Technical Information; Installation Considerations - Axor Edge 46760 Serie Mode D'emploi

Table des Matières

Publicité

T EC HN IC A L I N F ORMAT IO N
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Flow rate @ 44 PSI
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
I NSTA LL AT I O N CO N SID E R ATI ONS
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
⁄ This trim is for use with iBox Universal Plus model
01850181 (not included).
#46750XX1, 46751XX1 only: ONLY ONE
OUTLET ON THE IBOX CAN BE PLUMBED.
The second outlet must be sealed with a
plug. Do not use this trim if both outlets are
plumbed.
#46760XX1, 46761XX1 only: BOTH OUT-
LETS ON THE IBOX MUST BE PLUMBED. Do
not use this trim if only one outlet is plumbed.
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
5.9 GPM (22.3 l/min)
E N G L I S H
⁄ To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher than
120°F (49° C). In Massachusetts, the maximum
output temperature can be no higher than 112°F
(44° C).
⁄ This product is for use with shower heads rated at
1.1 GPM (4.2 L/min) or higher.
⁄ Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Edge 46761 serieEdge 46750 serieEdge 46751 serie

Table des Matières