Publicité
Les langues disponibles
Les langues disponibles
• Stop the unit immediately
ifyou f eel exces-
sive v ibration.
Vibration
isasign oftroubte.
Inspect
thoroughly
forloose nuts, bolts or
damage
before continuing.
Contact
an au-
thorized
service dealer forrepair orre-
placement
of a ffected
parts as necessary.
SNOW
THROWER
SAFETY
_WARNING:
Keep hands
and feet
away from the rotor when starting
or running
the engine.
Never attempt
to clear the rotor
with the engine/motor
running.
Stop engine
and disconnect
spark plug before unclogging
snow or debris from discharge
chute or when
adjusting
vanes.
_L, WARNING:
Never
lean over
dis-
charge
chute.
Rocks
or debris
could
be
thrown into the eyes and face and cause seri-
ous injury or blindness.
WARNING:
inspect
the area where
the unit is to be used.
Remove
objects that
could be thrown
or damage
the unit.
Some
objects
may be hidden
by fallen snow - be
alert for the possibility.
• Direct material
discharge
away from glass
enclosures,
automobiles,
etc.
• Do not run engine at high speed while not
removh_g snow.
• Be attentive
when using the snowthrower.
and stay alert for holes
in the terrain
and
other hidden hazards.
• Make sure the rotor will spin freety before
attaching
the snowthrower
to the power-
head.
• Ifthe rotor will not rotate freely duetofrozen
ice, thaw the unit before thoroughly
before
attempting
to operate
under power.
• Keep the rotor clear of debris.
• Do not throw snow near other people.
The
snow thrower could propel small objects at
high speed causing
injury.
• After striking a foreign
object, stop the en-
gine, disconnect
spark plug and inspect the
snowthrower
for damage
and repair if nec-
essary
before restarting
unit.
• Never operate the snowthrower
near glass
enclosures,
automobiles
and trucks.
• Never attempt to use the snowthrower
on a
roof.
• Never operate
the snowthrower
near win-
dow wells, dropoffs,
etc.
• Never discharge
snow onto public roads or
near moving traffic.
• Clear
snow from slopes
by going up and
down;
never across.
Use
caution
when
changing
directions.
Never
clear
snow
from steep slopes.
• Let snowthrower
run for a few minutes after
clearing
snow
so
moving
parts
do
not
freeze.
• Look behind and use care when
backing
up. Exercise caution to avoid slipping or fai-
ling. especially
when operating
in reverse.
• Know how to stop quickly.
_=WARNING:
If received
assemMed,
repeat alt steps to ensure your unit is properly
assembled
and all fasteners
are secure.
Examine
parts for damage.
Do not use dam-
aged parts.
NOTE:
if you need assistance
or find parts
missing
or damaged,
call 1-800-554-6723.
It is normal
for the fuel filter to rattle in the
empty fuel tank.
Finding fuel or oil residue
on muffler is normal
due to carburetor
adjustments
and testing
done by the manufacturer.
INSTALLING
TRIMMER
ATTACH-
MENT
CAUTION:
When installing trimmer attach-
ment. place the unit on a flat surface for stabiF
ity.
1.
Loosen
the coupler
by turning
the knob
counterclockwise.
Coupler
Shipping
protector
Knob
TIGHTEN
2.
Remove
shipping protector
from coupler.
3.
Remove
the shaft cap from the trimmer
attachment
(if present).
4.
Position locking/release
button of attach-
ment into guide recess
of coupler.
5.
Push the attachment
intothe coupler until
the locking/release
button snaps into the
primary hole.
6.
Before using the unit, tighten the knob se-
curely by turning clockwise.
Publicité
