Fagor VERSA 8-IN-1 Manuel D'utilisation page 26

Steam Function
This program allows you to steam delicate foods such as fish and vegetables.
1. Place the removable cooking pot into the Multi-cooker.
2. Place about 1-2 cups of water into the bottom of the removable cooking pot.
Then add the steamer basket* making sure that the water sits a little bit below
the steamer basket.
3. Place ingredients into the steamer basket and align and close the lid of the
cooker.
4. Turn the pressure regulating knob to STEAM.
5. Press the STEAM function and then press the + or – buttons to adjust the
cooking time. Press the START/STOP button to begin cooking.
6. When done steaming, press the START/STOP button to cancel the program.
*Please note that the Fagor Stainless Steel Steamer Basket and Trivet can be
purchased separately. To purchase this item, please go to the Fagor website
at www.fagoramerica.com or contact a Fagor Representative at 1-800-207-
0806.
NOTE: If the STEAM function is selected, but the regulator valve is turned to
PRESSURE the unit will beep every 10 seconds to alert you that you are either
using the wrong function or the regulator knob is not turned to the correct position.
When using the STEAM function the regulator knob must be turned to STEAM.
NOTE: If using the STEAM function but there isn't enough liquid in the removable
cooking pot, the multi-cooker will beep every 5 seconds to alert you that more
liquid needs to be added.
Keep Warm Function
The KEEP WARM program allows for reheating of food or can keep cooked food
warm for up to 12 hours.
1. Place the removable cooking pot into the Multi-cooker. Then place the food
into the removable cooking pot to reheat.
2. Place the lid on the Multi-cooker; align the pin on the handle with the
condensation collector, and turn it counterclockwise until it locks into place.
The locking pin will click when it's in place.
3. Turn the pressure regulator knob to STEAM.
4. Press the KEEP WARM button. The light on the keep warm button will flash
and the digital display will read 00:30.
5. Press the START/STOP button to begin the program. The indicator light will
stop flashing once the proper temperature has been reached.
24