Publicité
Les langues disponibles
Les langues disponibles
English
TROUBLESHOOTING
Symptom
1.
Tool will not
start when
operating the
on/off switch.
2.
Cutting depth is
less than that is
set.
3. Blade spins or
slips.
4.
Blade will not
cut a straight
line.
TECHNICAL DATA
Type/Model: . . . . . . . . . . GPT-CS007
Power connection/-frequency: . 230-240 V~
50 Hz
Power consumption: . . . . . . . . .600 W
Rated speed n /No load speed n
. . . . . . . . . . . . . . . . . .4200 min
Cutting depth: . . . . . . . . max. 26 mm
Saw blade: . . . . . . . . . . . . Ø 85 mm
Saw blade holder: . . . . . . . . Ø 10 mm
Thickness of saw blade for HSS and TCT
saw blade: . . . . . . . . . . . . . 1.4 mm
Thickness of saw blade for Diamond saw
blade:. . . . . . . . . . . . . . . . 1.9 mm
Protecting class: . . . . II / Double insulated
Weight: . . . . . . . . . . . . . . . 1,77 kg
Sound pressure level L
40
7063814-Precision-saw-Ma-2012-14.indb 40
7063814-Precision-saw-Ma-2012-14.indb 40
Possible Causes
Power cord not plugged in.
Power cord is broken.
Carbon brush has worn down.
Sawdust accumulated, block-
ing the base.
Blade is not tightly engaged
with the spindle.
Blade is dull.
Blade is not mounted properly.
Saw is not being guided
properly.
:
0
-1
: . . . . 101,3 dB(A)
pA
Possible Solution
Check to make sure power cord
is connected well into a working
outlet.
Unplug the power cord. Replace
it by a qualified maintenance
person.
Replace the carbon brush by a
qualified maintenance person.
austauschen.
Shake out sawdust. Consider
connecting a vacuum for dust
collection.
Remove the blade, and reassem-
bled it as described in install /
change the Blade section.
Mount a new, sharp blade on the
saw.
Check that blade is properly
mounted.
Use and edge guide.
Uncertainty K
: . . . . . . . . . . 3 dB(A)
pA
Sound power level L
: . . . . . 112,3 dB(A)
WA
Uncertainty K
: . . . . . . . . . . 3 dB(A)
WA
NOISE AND VIBRATION
WARNING!
Health hazard!
•
Always wear ear protection and suitable
safety clothing when working.
The noise and vibration values are deter-
mined according to EN 62841-1, EN 62841-
2-5 and EN 67045-2-22.
Handle
Hand-arm vibration (cutting wood)
Vibration emission level ah,W ≤ 2,5 m/s
2
28/06/2021 12:01
28/06/2021 12:01
Publicité
