Publicité
Les langues disponibles
Les langues disponibles
English
DELIVERY INCLUDES:
•
Precision hand circular saw
•
Instruction manual
•
HSS Sawblade
•
TCT Sawblade
•
Diamond cutting disc
•
Auxillary handle
•
Dust extraction adapter
•
Allen key
AUXILIARY HANDLE (FIG. B)
Screw the auxiliary handle
attachment point on the upper side of the
housing.
WARNING!
Risk of injury!
Always use the electric power tool with the
auxiliary handle attached.
INSERTING AND CHANGING TOOL
INSERTS (FIG. C, D)
1. Press the spindle lock
2. Loosen the clamping screw
turning it clockwise with the Allen key
17
.
3. Press the lock on the safety guard
push back the movable safety guard
and hold it firmly.
4. If the tool insert
downwards.
5. Clean the flange and install a new tool
insert. Pay attention to the direction of
motion (check the arrows on the hous-
ing and on the tool insert).
6. Tighten the clamping screws, anticlock-
wise, to secure the tool insert, ensuring
that the tool insert is concentric.
7. Before you operate the on/off switch,
make sure that the tool insert is correctly
installed, that the moving parts are free
and the clamping screws are firmly
tightened.
36
7063814-Precision-saw-Ma-2012-14.indb 36
7063814-Precision-saw-Ma-2012-14.indb 36
13
into the
16
.
3
by
14
,
19
is clamped, move it
Note!
Material damage!
The Allen key
17
must not be left
inserted in the clamping screw.
After installing or changing a tool insert,
allow the electric power tool to run for the
first minute without any load, in order to
make sure that the tool insert is correctly
seated.
EXTRACTION OF DUST AND SPLINTERS
(FIG. C, E)
WARNING!
Risk of injury!
When working with items coated in leadcon-
taining paint, for example, or with some
types of wood, harmful or poisonous dust
particles may be generated. This presents a
danger both for the user and for other peo-
ple nearby. Protect yourself with suitable
personal safety clothing and equipment and
keep other people away from the working
area. Connect an extraction system or a
vacuum cleaner to the electric power tool.
This will provide you with optimum extrac-
tion of dust and splinters from
theworkpiece.
Advantages: You preserve both the electric
power tool and your health. Moreover, you're
working area remains clean and safe.
1. Connect the suction hose
dust extraction connection
2. Make sure that the seal inside the
smaller of the connecting pieces on the
hose
9
fits on to the dust extraction
connection
6
.
3. Turn the suction hose to the right until it
engages.
4. Attach a suitable dust extraction device.
to the
9
.
6
28/06/2021 12:01
28/06/2021 12:01
Publicité
