Gaggenau RC 222 Mode D'emploi page 30

Appliance self-test
Your appliance features an automatic self-test
program which shows you sources of faults
which may be repaired by customer service only.
Starting the appliance self-test
1. Switch off the appliance with the On/Off
button ÿ and wait 5 minutes.
Switch on the appliance with On/Off button ÿ
2.
and hold down the "fast" button refrigerator
compartment Û for 3-5 seconds within the first
10 seconds until an acoustic signal sounds.
The self-test programme starts.
While the self-test is running, a long acoustic
signal sounds.
When the self-test ends and an acoustic signal
sounds twice, your appliance is in working order.
If the "fast" button refrigerator compartment Û
flashes for 10 seconds and 5 acoustic signals sound,
there is a fault. Inform customer service.
Ending the appliance self-test
When the programme has ended, the appliance
switches over to normal operation.
30
Customer service
Your local customer service can be found in the
telephone directory or in the customer-service index.
Please provide customer service with the
appliance product number (E-Nr.) and production
number (FD-Nr.).
These specifications can be found on the rating plate.
To prevent unnecessary call-outs, please assist
customer service by quoting the product and
production numbers. This will save you additional
costs.
Repair order and advice on faults
Contact information for all countries can be found
on the enclosed customer service list.
GB 0844 892 8988
IE 01450 2655
US 877 442 4436
E - Nr
FD - Nr
Calls from a BT landline will be
charged at up to 3 pence per
minute. A call set-up fee of up to
6 pence may apply.
toll-free