Dometic RMD10.5S Instructions De Montage page 19

RMD10
The manufacturer recommends using a flexible seal to ease removal and installation
for maintenance purposes.
Select one of the three versions for draft-proof installation (fig. 7, page 7):
Stop bar behind the fridge (A)
➤ Glue a flexible sealing lip (1) to a stop bar (2) behind the refrigerator (3).
➤ Push the refrigerator combination against the stop bar with the flexible sealing
lips.
✔ The space behind the refrigerator is sealed to the interior of the vehicle.
Side gap distance of up to 5 mm (0.2 in.) between refrigerator and
furniture (B)
➤ Glue the sealing lips (see chapter "Accessories" on page 15) on the side of the
furniture (4).
➤ Push the refrigerator combination against the flexible sealing lips on furniture.
✔ The space behind the refrigerator is sealed to the interior of the vehicle.
Side gap distance of 5 mm to 10 mm (0.39 in.) between refrigerator and
furniture (C)
➤ Glue the double lipped sealing (see chapter "Accessories" on page 15) on the
side of the furniture (4).
➤ Push the refrigerator combination against the double lipped sealing on furniture.
✔ The space behind the refrigerator is sealed to the interior of the vehicle.
5.3 Making air inlet and outlet vents
I
NOTE
• Deviations from the inlet and outlet variations shown here must be
approved by the manufacturer.
• At high ambient temperatures, the refrigerator can only provide its
maximum cooling capacity if the optimum ventilation has been pro-
vided.
EN
Installing the refrigerator
19