Publicité
Les langues disponibles
Les langues disponibles
Setting the time and making adjustments
1. Loosen the winding-crown by turning it counter-clockwise.
2. Wind the watch manually by making around 30 clockwise turns
of the crown in position "A". The watch will subsequently be
automatically rewound by your wrist movements.
3. Pull the winding-stem out to position "C" (the movement
stops) and rotate the crown counter-clockwise until the date
changes and the hands are between 2 and 4 am.
Fast date adjustment is not advisable between 8pm and 1am.
If the wearer does nonetheless decide to make an adjustment
during this period, the date will not jump at midnight, but only
24 hours later. This operation will however not damage the
watch mechanism.
4. Press the winding-stem back to position "B" and make rap-
id date adjustments by rotating the crown counter-clockwise
until the required date appears in the window.
5. Pull the winding-stem out to position "C" again; turn the crown
in the required direction until the correct time is displayed.
6. Push the winding-stem back into position "A" (the movement
starts running again).
7. Press the crown gently towards the case and tighten the crown
by rotating it clockwise.
9
Publicité
