Abus IPCS84510 Manuel Utilisateur page 83

7.4.3.4 NAT
Enable UPnP:
UPnP name:
Enable port mapping:
Mapping type:
Manual:
enables or disables the UPnP function. When the UPnP
function is enabled, the network camera can be found on
Windows networks.
assigning a UPnP name, which the camera uses to appear on
the network via UPnP.
The NAT (Network Address Translation) or port mapping
function automatically sets up port forwarding for access from
the Internet to the camera in the router (if the router supports
this).
Auto: automatic assignment of all ports
manual assignment of all ports
83