Abus IPCS84510 Manuel Utilisateur page 101

7.7.6 Privacy mask
Preview area:
Enable privacy mask:
Draw Area:
Delete all:
7.7.7 Tasks
Function for performing a certain action in a defined amount of time (using a time schedule)
Enable scheduled tasks:
Park time:
Auto-scan:
Frame scan:
Random scan:
Patrol:
Pattern:
Preset:
Panorama scan:
Tilt scan:
Restart Dome:
Adjust Dome:
AUX output:
The preview of the video and privacy masks that have been set up
are displayed here. Privacy masks are drawn directly in the
preview area.
Enable/disable the privacy mask function.
Draw polygonal areas. The drawing mode is closed by pressing
this button again. The area drawn is blacked out and so cannot be
seen in the live image or in the recording.
Delete a privacy mask
Enable all tasks configured in the time schedule.
This is the amount of time that must pass after manual PTZ
control before the planned task function can be re-enabled (5–
720 seconds).
horizontal scan (360°, continuous). The speed can be set from
the basics menu.
horizontal scan, pausing for 4 seconds every 90°.
scan at random.
start a configured patrol.
start a configured pattern.
retrieve a preset (preset position).
diagonal scan (360° horizontal, 0~90° vertical, continuous).
horizontal scan (0~90°).
restart the camera.
initialise the PTZ Dome.
switch a relay output.
101