Abus IPCS84510 Manuel Utilisateur page 102

7.7.8 Reset PTZ settings
Reset PTZ settings to factory settings (e.g. presets, patrols)
7.8 Storage
7.8.1 Record schedule
Post-record:
Overwrite:
Video stream:
Elapsed time:
Enable record schedule:
determine how long a video should be saved for after an
event.
Determine the behaviour if an SD card/NAS is full (end
recording or replace oldest data with new data = cycle
recording function).
Select the video stream for recording.
Set the number of days until the data are overwritten.
after enabling and configuration, video data are either saved
constantly or at certain times and if necessary when an event
occurs. The schedule can be configured using the Edit button.
102