Please bear in mind that the control knobs do not get wet. Use a soft, damp cloth for
cleaning.
►
Leave the oven door open to prevent the device from being re-started accidentally.
Exterior housing
Clean the exterior surfaces of the device with a damp cloth.
Remove the splash guard from the uni and clean it.
Place the splash guard at original position.
Make sure that the 3 hooks and the back are inserted into the openings again. Flap the
splash guard up and press it behind the edge. For this press your thumbs into the inlets (a)
again.
Please note
Cleaning of the filter
Turn the metal screws left and right to loose them.
Clean the filter.
Place the filter again and turn the screws
clockwise to fix them.
18.3 Cleaning oft he upper splash
guard
Press your thumbs into the inlets (a) to
Loosen the upper splash guard and pull it down.
54