Publicité
Les langues disponibles
Les langues disponibles
1
a.
Make sure your hands are clean, dry and static free.
Temporarily ground yourself by touching a grounded
metal object in order to discharge any static electricity
in your body.
CAUTION
Static electricity can cause damage to the circuit board.
Discharge any static electricity by touching a metal object
that is grounded before beginning the Wireless Stomp
Switch battery replacement.
b.
With the back of the Wireless Stomp Switch facing
you, use a large coin to rotate the Battery Cover
counterclockwise until the Battery Cover loosens and
cannot be turned any further counterclockwise.
The battery for the Wireless Stomp
NOTICE:
Switch may be replaced with or without the
Pedestal attached.
2
c.
Remove the Battery Cover and the old battery.
Replace the battery with a new CR2450 coin cell
battery. Note the proper polarity of the battery.
The replacement battery must be
NOTICE:
a model CR2450 coin cell type. It is strongly
recommended that a high quality battery is used.
The positive (+) of the battery should be facing
towards the Battery Cover.
WARNING
THIS PRODUCT CONTAINS A BUTTON BATTERY.
If swallowed, a lithium button battery can cause severe or
fatal injuries within two hours. Keep batteries out of reach of
children. If you think batteries may have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
©2024 Johnson Outdoors Marine Electronics, Inc.
REPLACING THE WIRELESS STOMP SWITCH BATTERY
1b
O-ring
Battery
Cover
Wireless Stomp
Switch (back)
Lock Icon
Battery
Cover
Battery
Wireless Stomp
Switch (back)
minnkota.johnsonoutdoors.com | 17
Publicité
