Cristec YPOWER Manuel Utilisateur page 20

Precautions regarding dust, seepage and falling water
The charger should be located so as to prevent penetration of damp, liquid, salt and dust, any of
which could cause irreparable damage to the equipment and be potentially hazardous for the user.
The appliance should be installed in a dry and well-ventilated place.
Precautions regarding inflammable materials
The charger should not be used near inflammable materials, liquids or gases.
The batteries can emit explosive gases : please follow the manufacturer's instructions carefully
when installing them.
Nearby the batteries : ventilate the area, do not smoke, do not use any open flame.
Use fuses as defined in this manual.
The DC output fuses F1 and F2 should only be replaced by the following blade fuse :
Label : F1, F2, Quantity 2
Reference :
Other precautions
Never attempt to drill or to machine the charger's case : this may damage components or cause
metal chips or filings to fall on the charger's board.
Do not do anything that is not explicitly stated in this manual.
Manufacturer : LITTLEFUSE
297030 Rating : 32V-30A
19