Publicité
Les langues disponibles
Les langues disponibles
3. OPERATING YOUR APPLIANCE
CONTROLS
You can set the temperature in the range of 4° C to 18° C (39° F to 64° F) .
To display the set temperature, press both the DOWN and LIGHT buttons for three seconds to display
the actual temperature, until pressing any button to return to display the set temperature .
1.
To turn the unit ON and OFF, press and hold this button for approximately three (3) seconds.
2.
Energy conservation button: Pressing this button for 3 seconds will turn the energy conservation
mode ON or OFF. In this mode, the LED light and display will turn off, and the °C/°F light will be on.
3.
Indicator light: Shows that the compressor is in operation.
4. Used to increase the temperature in increments of 1° C (or 1° F).
5. Used to decrease the temperature in increments of 1° C (or 1° F).
6. Press this button to switch the indicator light between ° C / ° F.
7. Turns the interior light ON and OFF. If you use this button, the light is no longer controlled by the
switch and remains ON. The light button deactivated when the Energy conservation button is on).
LED display screen shows the temperature setting.
TEMPERATURE SETTINGS
The actual zone temperature may have a difference of +/- 3° C (+/- 5ᵒ F) from the desired setting depending
on loading and ambient conditions. For example, placing your unit in extreme cold or hot conditions may
cause interior temperatures to fluctuate.
- 25
Publicité
