Publicité
Les langues disponibles
Les langues disponibles
Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
6.
TRANSPORTATION
The display cabinet is contained in a specially crated package that enables transportation by
the use of fork-lift trucks. Handle the machine on its own pallet or on a similar platform; use
a fork lift, either manual or electric, provided it is adequate for handling such appliances and
it has the requisite lifting capacity.
Handling is reserved to the authorised after-sales service.
The equipment MUST be kept vertical.
7.
STORAGE AND DISMANTLING
WARNING! Use protective gloves during unpacking and installation operations.
During unloading and movement operations, avoid tilting the machine and avoid sudden manoeuvres. The unit is shipped anchored
onto a wooden base and protected by corner posts, cardboard top and nylon wrapping. Keep all packaging away from children. For
each subsequent handling of the cabinet, the use of the wooden platform is recommended. Carefully remove the packaging, taking
care not to damage the components and not to throw away those that will be needed for assembly.
ATTENTION! After unpacking, check that the appliance has not suffered damage during transportation.
To unpack the bench proceed as follows:
1.
Unscrew the screws and remove the wooden cage.
2.
Remove the plastic cover.
3.
Unscrew the screws from the wooden base.
4.
Remove the base part shown in the figure.
5.
Lift the counter at the points indicated using the forklift.
6.
Remove the wooden base.
DELIGHT 16
DELIGHT 18
DELIGHT 20
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
Lifting points
3
2 2 / 8 4
PAGE
UM000494
N° DOC
1
Publicité
