Medion P85027 Notice D'utilisation page 355

26. Troubleshooting
If the device stops working properly, please refer to the troubleshooting table
shown below to see if you can resolve the problem yourself.
Never attempt to repair the device yourself. If a repair is necessary, please contact
our Service Centre or a suitable authorised repair workshop.
Problem
The remote control is not
working.
The display remains
black.
356
Possible cause
Are the batteries
inserted correctly?
Are you more than 7 m
away from the radio?
Is the route from the
remote control to the
infrared sensor clear?
Is the remote control
aligned with the sensor?
Are both ends of
the mains adapter
connected properly?
Solution
Insert the batteries
correctly.
Reduce the distance.
Remove obstacle.
Align the remote control
correctly.
Connect the power
supply plug on the
supplied mains adapter
to the DC IN socket on
the device. Plug the
mains plug into an AC
100–240 V ~ 50/60 Hz
socket.