Medion P85027 Notice D'utilisation page 334

11.4. WLAN connection via WPS
Once a WLAN network providing the option to connect via WPS has been selected,
the WPS menu appears. If you do not want to establish a connection via WPS, select
SKIP WPS here.
11.4.1. WPS button
 Select PUSH BUTTON to enable the WPS function to be used via the router's
WPS button.
 Then press the WPS button on the router and press OK to confirm the
connection with the internet radio.
To this end, please also note the information in your router's user manual.
• The device will now establish a connection with the network. Once the
connection is successful, a corresponding notice is then displayed.
• The device can now play back media via the network and receive internet radio
stations as long as there is an active internet connection via the network.
• The device stores the connection data so that it does not need to be re-entered
to re-establish the connection.
11.4.2. Entering a PIN
If the router does not feature a WPS button but does provide the option for a WPS
connection by entering a PIN on the router's web interface, select ENTER PIN.
When prompted, enter the PIN shown on the internet radio display on the router's
web interface and press OK to confirm your entry.
To this end, please also note the information in your router's user
manual.
The device will now establish a connection with the network. Once the connection
is successful, a corresponding notice appears.
 Press OK to confirm.
The device stores the connection data so that it does not need to be re-entered to
re-establish the connection.
The device can now play back media via the network and receive internet radio
stations as long as there is an active internet connection via the network.
11.5. Entering a network key
If you have skipped the WPS menu, you must enter the network key.
 Enter the network key for the WLAN access point using the number/character
buttons on the remote control
Alternatively:
 Enter the network key using the NAV/OK dial on the device:
DE
FR
NL
ES
IT
EN
335