Nolan N120-1 Sécurité Et Instructions D'utilisation page 21

4 MAINTENANCE AND CLEANING
- Disassemble the PINLOCK
cloth, gently clean it with mild liquid soap. Remove all soap under running water.
- Leave the visor to dry in warm and dry air without wiping it.
- To preserve the visor's condition over time, leave the helmet to dry in a ventilated
and dry place with the visor open after use. Keep it away from heat sources and
store it in a place away from direct light.
- Do not use solvents or chemical products.
VISION PROTECTION SYSTEM ( VPS ) - ( VP-17S o VPS-17L, depending on helmet size )
The exclusive inner VISION PROTECTION SYSTEM (VPS) is a LEXAN™ (*) polycar-
bonate moulded sunscreen with scratch-resistant/fog-resistant treatment. It is very
simple and practical to use: just lower it to activate it or lift it to remove it from your field
of vision. It is useful in all sorts of situations, both on long journeys out of town and
shorter town trips.
Moreover, the fastening system allows you to assemble and disassemble the sun-
screen for ordinary maintenance and cleaning, using no tools.
1 OPERATION
The VPS mechanism allows you to activate the sunscreen by simply lowering it until the
visor field of vision is partially covered. In this way, the light transmittance is reduced
as desired.
At any time, without operating the visor, the VPS can be deactivated with a simple
movement and easily lifted up to restore the normal conditions of visibility and protec-
tion guaranteed by the approved helmet visor.
1.1 To activate the VPS, move the slider as in Fig.12 until you hear a click that means
that the VPS is in the desired position.
The VPS is adjustable in a range of intermediate positions to ensure the best
comfort for the user with respect to the terms of use.
1.2 To deactivate the VPS, press the recovery button as shown in Fig.13 until the VPS
unlocks and moves automatically in standby position.
2 PRECAUTIONS FOR USE
Current homologation standards (ECE22-06) establish that the minimum light transmit-
tance levels of visors should be no less than 80%; for homologated sunscreens, the
minimum transmittance level should be no less than 20%.
This regulation also provides for the simultaneous use of the visor and sunscreen, both
as standard.
WARNING
We recommend you to use the VPS only and solely together with the homologat-
-
ed standard visor, which has a transmittance value greater than 80%.
- The VPS does not replace the protection guaranteed by the visor.
- The VPS can only be activated during daytime and in weather and environmental
conditions with a particular light, for example, strong brightness caused by high
intensity and/or incidence of sunlight.
LEXAN is a trademark of SABIC.
(*)
inner visor from the visor. Using a damp and soft
®
INSTRUCTIONS FOR USE
N120-1
19