EINHELL NEW GENERATION STE 2500/1 Mode D'emploi page 10

Anleitung STE 2500-1 SPK1
GB
15. Troubleshooting
Fault
Engine does not start
Generator has too little or no
voltage
10
21.09.2006 15:24 Uhr Seite 10
Cause
Automatic oil cut-out has not res-
ponded
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air filter dirty
Remedy
Check the oil level, top up with
engine oil
Refuel
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter