HOLZMANN MASCHINEN BS712TOP Mode D'emploi page 41

18.4 Alignment of saw blade guides
19 STORAGE
Improper storage can damage and destroy important components. Only store packed
or unpacked parts under the intended environmental
When not in use, store the machine in a dry, frost-proof and lockable place to prevent the
formation of rust on the one hand and to ensure that unauthorised persons and in particular
children have no access to the machine on the other.
20 DISPOSAL
Observe the national waste disposal regulations. Never dispose of the machine,
machine components or equipment in residual waste. If necessary, contact your
local authorities for information on the disposal options available.
If you buy a new machine or an equivalent device from your specialist dealer,
he is obliged in certain countries to dispose of your old machine properly.
HOLZMANN MASCHINEN GmbH
NOTICE
www.holzmann-maschinen.at
The saw blade is guided. The saw blade
guide is preset for a saw blade of 0.9 mm
thickness. The saw blade guide can be
adjusted by loosening the screw. Make sure
that the bearings are in light contact with the
saw blade, then fix the screw (L).
conditions!
STORAGE
41
BS 712TOP; BS712TOP-G