Publicité
Problem
8. With the engine running,
activation of the traction pedal
does not move the machine.
If any of the faults listed below occurs, replace the relevant fuse.
9. The engine does not start or
starts and stops immediately.
The battery is charged.
10. Electrical cutting height
adjustment does not work.
11. All electrical functions are
out of operation. The battery
is charged.
If problems persist after the operations above have been performed, contact your dealer.
Warning! Never attempt to carry out complicated repairs without the necessary tools or
technical ability. Any poorly performed interventions will automatically nullify the warranty
and exonerate the manufacturer from all liability.
Probable cause
"Disengage transmission" lever in
the disengaged position.
Fuse 10A blown.
Fuse 20A blown.
Fuse 30A blown.
Remedy
Engage the transmission.
Replace fuse 10A.
Replace fuse 20A.
Replace fuse 30A.
Publicité
